Assembly power cleaner

Name: Assembly power cleaner
Brand: Würth Oy
SKU: 089010720

Power cleaner for assembly
ASMBYCLNR-POWER-REFILLOMAT-CANI-20LTR

Art.-no. 089010720

EAN 4061975640970

All versions

Similar products

Assembly power cleaner

Art.-no. 089010720

Quantity

x 1 pcs

Show availability at another Würth Center

Exclusively for trade customers

Locate Würth Center
Login/Register
Call customer service: 010 308 6700

Highly effective special cleaner containing solvents. NSF-certified

High cleaning performance

Ideal for the removal of oily, greasy, sooty, and lightly resinified dirt

Short flash-off time

Fast cleaning with no residue

Short downtime of the machine parts to be treated

No second application required

Good material compatibility

FKM and polymer seals do not swell.

Causes no corrosion on metal surfaces such as iron, steel, stainless steel, aluminium, brass

Spray head with direct jet

Targeted and effective cleaning of contaminated parts

Acetone-, AOX- and silicon-free

Notice

Prior to application, check the compatibility of rubber, plastic parts and painted surfaces on an invisible area.

NSF K1 registered (no.: 150705, 150706), complies with requirements of USDA K1.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Oy Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

Application area

For cleaning engine and gear casings, brake systems, vehicle, machine and clutch parts in maintenance, repair and assembly work.

Instructions

Spray the surface to be cleaned and then wipe it thoroughly with a clean cleaning cloth.

Contents	20 l
Smell/fragrance	Characteristic
Colour	Transparent
Chemical basis	Aliphatic hydrocarbon
Density/conditions	0.71 g/cm³ / at 20°C
Min. flashing point	-18 °C
Acetone-free	Yes
Silicone-free	Yes
AOX-free	Yes

Additive article:

Product

Description

Quantity

Price
/PU

Plastic tap DN 60 connection

TAP-(F.PLACANI-20/60LTR)

Art.-no. 089130203

For plastic canisters with DN 60 connection for 20 L/25 L and 60 L

x 1 pcs

Canister coating ORSY®protec

CANIJAC-F.FILSYS-ORSYPROTEC

REFILLOMAT

Art.-no. 089187077

Electrically conductive canister coating for all 20 l REFILLOmat active agents

x 1 pcs

REFILLO®mat filling can

CAN-EMPT-F.REFILLOMAT-ASSEMBLYPOWERCLNR

REFILLOMAT

Art.-no. 089188124

The safe and economical system for automatically refilling spray cans with active ingredients and compressed air

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Fitting products for your order

Assembly power cleaner

Important information: