Welcome to Würth Finland For trade customers only

Assembly power cleaner Plus

ASMBYCLNR-PLUS-500ML

Art.-no. 0890107003

EAN 4068362366000

-
Assembly power cleaner Plus

Art.-no. 0890107003

-
Quantity
PU
x 12 pcs

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

Powerful special cleaner for maintenance, repair and assembly work.
  • Effortlessly removes brake dust, encrusted dirt, oil, grease, resin and corrosion protection coatings

  • Reduced risk of fire

  • Recommended product in accordance with the German Ordinance on Hazardous Substances (protection level 2)

  • Free from AOX, aromatics, silicone and n-hexane

  • Spray nozzle
Notice

Do not spray on hot parts.


Check plastic parts, rubber parts and painted surfaces for material compatibility before use.

The instructions for use are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • For maintenance, repair and assembly of components exposed to oily and greasy residues and resin deposits

  • During brake maintenance and repair work, as well as clutch repair work

  • Particularly effective against paint-like contaminants

Contents

500 ml

Colour

Colourless

Chemical basis

Hydrocarbon

Density/conditions

0.755 g/cm³ / at 20°C

Min. flashing point

-17 °C

Acetone-free

No

Silicone-free

Yes

AOX-free

Yes

VOC-free

No

Shelf life from production/conditions

24 Month / at 20°C

Suitable glove:
 
Product
Description
Chemical protective glove chloroprene
Chemical protective glove chloroprene
Description:
Permeation level: 1
Heavy-duty design
Vinyl chemical and moisture protective glove
Vinyl chemical and moisture protective glove
Description:
Permeation level: 2
Fully dipped protective glove with vinyl coating on cotton jersey lining
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 1
With cotton velour finish inside.
Disposable nitrile glove
Disposable nitrile glove
Description:
Permeation level: 0
Liquid-proof, food-safe disposable glove
Disposable nitrile grip glove
Disposable nitrile grip glove
Description:
Permeation level: 0
Unique, diamond texture for optimal grip
Disposable glove Nitrile Grip Comfort
Disposable glove Nitrile Grip Comfort
Description:
Permeation level: 0
Very robust disposable gloves with excellent grip thanks to special nubs and maximum wearing comfort thanks to cotton flocking inside
Disposable gloves, nitrile, extra strong, type A
Disposable gloves, nitrile, extra strong, type A
Description:
Permeation level: 0
Durable and robust disposable gloves with excellent chemical protection
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information