Assembly tape Carpeting
Mounting tape carpet
MNTTPE-DB-CARPE-WHTE-50MMX25M
Register and access more than 75 000 products
Very good adhesive force
Outstanding adhesion, even to rough substrates.
Also suitable for difficult bonding situations, e.g. PVC, cloth and rough carpet, metal to wood, metal to metal, cement to wood.
Can be removed by hand
Tape can be applied quickly and easily.
Fabric backing
The tape adapts very well to the surface, even uneven surfaces.
This information is intended to advise you, to the best of our knowledge, based on our tests and experience. However, due to the large number of applications and the storage and handling conditions that lie outside the scope of our influence, we assume no liability for the application results in individual cases. This also applies to the use of the non-binding technical and commercial customer services provided by us. We always recommend that you conduct your own tests. We guarantee the consistent quality of our products. We reserve the right to make technical changes and to further develop our products.
Datasheets(X)
- Laying carpets
- Bonding on stairs
- Securing and bonding a range of materials in the construction, furniture and textile industries
The surfaces to be glued must be dry and free from dust, grease, and silicone.
To ensure proper adhesion, the tape must be adequately pressed onto the
material being bonded.
With delicate surfaces and porous substrates (e.g. wood, stone), please carry out preliminary tests.
If plastics containing plasticising additives are to be adhered, the plasticisers may change the adhesive layer. This will impair the strength of the adhesive.
The mounting tapes are only UV-resistant in certain cases and should therefore be protected from direct sunlight.
Adhesive base | Synthetic natural rubber |
Backing material | Cotton fabric |
Colour | White |
Roll width | 50 mm |
Length of roll | 25 m |
Thickness | 0.24 mm |
Min./max. processing temperature | -30 to 60 °C |
Ultraviolet resistance | Limited |
Tensile strength | 80 N/mm² |
Adhesive force at 25 mm | 27 N |
Elongation at break | 15 % |
Min. final strength | 23 h |
Shelf life from production/conditions | 12 Month / at 10°C to 23°C |