Welcome to Würth Finland For trade customers only

Bolt M8 BFB 8 BFB 8 DIN EN 206

Stud M8 for concrete BFB 8
STUD-CONC-BFB8-LT15-LS27-M8

Art.-no. 0864081527
EAN 4011231794510

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

For concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60)
Notice

Practical tip:


  • To prevent the connection between the bolt and the mounting substrate being overloaded by torsion forces, the corresponding female thread must be screwed tightly using a torque wrench

  • Recommended tightening torques:M6/M8

  • Concrete surfaces: 4 Nm/6 Nm

  • Steel surfaces: 6 Nm/8 Nm

All bolts are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.

Product information

Datasheets(X)

Certificates/ Documents / additional info

 | 

 | 

Material

Steel

Surface

Zinc plated

Shaft length (Ls)

29 mm

Shank diameter (Øds)

4 mm

Thread length (metric thread) (Lg)

10 mm

Thread type x nominal diameter

M8

Suitable for device type

Würth BST 350
Hilti DX 2
Hilti DX A40
Hilti DX A41
Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information