Brick tie TPR
Brick tie nail head, SS/stainless steel
BRICKBANDNAIL TPR 250MM RST
Register and access more than 75 000 products
Brick tie is a stainless steel retaining clip used for fixing brickwork
to the frame structure.
As the structure is always a wet space, all fasteners must be made of stainless steel.
A minimum air gap of 30 mm is required.
Insulation is pushed through the nail and locked in place with the counter plate.
The remaining length is bent into the brick seam.
Recommended installation: 4 pcs/m²
Material: Stainless steel
Datasheets(X)
Measuring instructions for brick ties:
Insulation thickness + air gap + centre of the brick + 50-mm bend
If the brick tie is fastened in a wooden frame for example, a minimum displacement of 40 mm is added to the wood.
Counter plates for brick ties:
32 x 40 mm Hard wool 5938 002 015
32 x 60 mm Soft wool 5938 002 016
Length | 250 mm |
Suitable for max. bowl spacing | 195 +/- 15 mm |
Material | Stainless steel A2 |
Thickness | 4 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!