Chemical injection mortar Concrete Multi WIT-UH 300 - ANC-MORT-(WIT-UH300)-CART-420ML

Chemical injection mortar Concrete Multi WIT-UH 300 - ANC-MORT-(WIT-UH300)-CART-420ML - 1

Chemical injection mortar Concrete Multi WIT-UH 300 - ANC-MORT-(WIT-UH300)-CART-420ML - 2

Chemical injection mortar Concrete Multi WIT-UH 300

Name: Chemical injection mortar Concrete Multi WIT-UH 300
Brand: Würth Oy
SKU: 5918500420

Chem. injection mortar Concrete Multi WIT-UH 300
ANC-MORT-(WIT-UH300)-CART-420ML

Art.-no. 5918500420

EAN 4056807248592

All versions

Similar products

Chemical injection mortar Concrete Multi WIT-UH 300

Art.-no. 5918500420

Quantity

Show availability at another Würth Center

Exclusively for trade customers

Locate Würth Center
Login/Register
Call customer service: 010 308 6700

High-performance mortar for concrete and post-installed rebar connections

Two-component reactive resin mortar, urethane vinyl ester hybrid mortar, styrene-free

Individual fixing point in cracked and uncracked concrete, seismic performance category C1 (M8 to M30) and C2 (M12 to M24): Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG

Areas subject to the German Federal Water Act (Wasserhaushaltsgesetz - WHG): Würth injection system WIT-UH 300 (bonded anchor) for use in uncoated LI/LIP concrete surfaces in SFH facilities

Post-installed rebar connection

Proof of Performance

European Technical Assessment ETA-17/0127: Individual fixing point + cracked and uncracked concrete (anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG), seismic performance category C1 (M8 to M30) and C2 (M12 to M24)

European Technical Assessment ETA-17/0036: Post-installed rebar connection (REBAR)

European Technical Assessment ETA-23/0699: Post-installed rebar connection with improved bond and splitting failure when subjected to static action

General type approval Z-74.8-207: Würth WIT-UH 300 injection system for use in uncoated LI/LIP concrete surfaces in SFH facilities (anchorage in sealing surfaces subject to the German Federal Water Act)

General type approval Z-21.8-2156: Post-installed rebar connection subject to fatigue-inducing action

Application area

Fastening of railings

Wooden structures

Post-installed rebar connection (REBAR)

Create the drill hole

Make the drill hole using Würth hollow drill bit, there is no need for hole cleaning

Clean the drill hole:

Blow out 2x with oil-free compressed air (min. 6 bar)/brush out 2x/blow out 2x with oil-free compressed air (min. 6 bar)

Cut anchor rod to length and mark the desired insertion depths

Screw mixer onto cartridge

Discard the first section of mortar (until the mortar is uniformly coloured - approx. 10 cm)

Fill injection mortar starting from base of drill hole

Press in anchor rod up to drill hole base while turning slightly

Visual check of mortar volume, embedment depth mark

Observe the injection mortar curing time

Install component, apply installation torque

European Technical Assessment ETA-17/0127: Individual fixing point + cracked and uncracked concrete (anchor rod W-VI-A, anchor rod W-VD-A, standard threaded rod with acceptance test certificate 3.1, female thread anchor W-VI-IG), seismic performance category C1 (M8 to M30) and C2 (M12 to M24)

European Technical Assessment ETA-17/0036: Post-installed rebar connection (REBAR)

European Technical Assessment ETA-23/0699: Post-installed rebar connection with improved bond and splitting failure when subjected to static action

General type approval Z-74.8-207: Würth WIT-UH 300 injection system for use in uncoated LI/LIP concrete surfaces in SFH facilities (anchorage in sealing surfaces subject to the German Federal Water Act)

General type approval Z-21.8-2156: Post-installed rebar connection subject to fatigue-inducing action

Product information

Würth Oy Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents / additional info

Click here for the complete CAD library

Application area

Suitable for fastening metal structures, metal profiles, wooden structures, brackets, pipes, cable conduits etc.

Suitable for structural expansions, ceiling and wall outlets, expansion of load-bearing structures, reinforcement of load-bearing structures, attachment of balconies and canopies, sealing of temporary openings and "forgotten" reinforcing bars

Fastening system for use in collection trays, collection facilities and surfaces made from uncoated LI and LIP concrete in systems for storing, filling and handling substances that are hazardous to water

Type description	WIT-UH 300
Container	Coaxial cartridge
Contents	420 ml
Suitable application gun	Battery-powered application gun 420ml, Application gun MULTI, Application gun WIT 420ml, Pneumatic application gun 420ml, EasyMax 420 ml, HandyMax 420 ml
Min./max. processing temperature /conditions	-5 to 40 °C / temperature in the anchorage ground during processing and hardening
Min./max. ambient temperature / Conditions	-40 to 160 °C / after completely curing process
Temperature resistance, long-term temperatures max.	100 °C
Temperature resistance, short-term temperatures max.	160 °C
Shelf life from production/conditions	18 Month / cool and dry storage area, 5°C to 25°C
Approval	ETA-17/0036, ETA-17/0127
Chemical basis	Two-component resin
Colour	Grey

Required accessory:

Product

Description

Quantity

Price
/PU

Pneumatic 2C application gun WIT

APPLGUN-PN-ANC-(WIT-420ML)

Art.-no. 0891004420

Pneumatic version

x 1 pcs

Application gun WIT

APPLGUN-ANC-(WIT-420ML)

Art.-no. 08910380

For applying 380 ml, 410 ml and 420 ml WIT cartridges

x 1 pcs

Hand slide valve

SLIDONVLVE-F.PNNOZ-PREMO-3/8IN

Art.-no. 069990338

For drill hole cleaning with compressed air (pre-assembled with plug-in nipple and claw coupling). For connecting the pneumatic hose WIT-SDD to a compressor.

x 1 pcs

Pneumatic hose WIT-SDD

HOSE-PN-(WIT-SDD8-20)-ID7MM

Art.-no. 06999037

For borehole cleaning with compressed air. Incl. pre-assembled compressed air and threaded connection.

x 1 pcs

Blow gun

BLWOUTGUN-(PIPE-STRAIGHT)-PLAHNDL-490MM

Art.-no. 07149214

Continuously adjustable

x 1 pcs

Cleaning brush with M6 WIT-RMB connecting thread

CLNBRSH-RMB10-MA-ST-(THR-M6)

Art.-no. 0903489610

For drill hole cleaning in concrete and masonry (WIT-VM 250, WIT-UH 300, W-VIZ, WIT-CONCRETE SCREW, WIT-PM 200, WIT-NORDIC, WIT-PE 500)

x 1 pcs

Cleaning brush with M6 WIT-RMB connecting thread

CLNBRSH-RMB12-MA-ST-(THR-M6)

Art.-no. 0903489612

For drill hole cleaning in concrete and masonry (WIT-VM 250, WIT-UH 300, W-VIZ, WIT-CONCRETE SCREW, WIT-PM 200, WIT-NORDIC, WIT-PE 500)

x 1 pcs

Cleaning brush with M6 WIT-RMB connecting thread

CLNBRSH-RMB14-MA-ST-(THR-M6)

Art.-no. 0903489614

For drill hole cleaning in concrete and masonry (WIT-VM 250, WIT-UH 300, W-VIZ, WIT-CONCRETE SCREW, WIT-PM 200, WIT-NORDIC, WIT-PE 500)

x 1 pcs

Cleaning brush with M6 WIT-RMB connecting thread

CLNBRSH-RMB18-MA-ST-(THR-M6)

Art.-no. 0903489618

For drill hole cleaning in concrete and masonry (WIT-VM 250, WIT-UH 300, W-VIZ, WIT-CONCRETE SCREW, WIT-PM 200, WIT-NORDIC, WIT-PE 500)

x 1 pcs

Cleaning brush with M6 WIT-RMB connecting thread

CLNBRSH-RMB22-MA-ST-(THR-M6)

Art.-no. 0903489622

For drill hole cleaning in concrete and masonry (WIT-VM 250, WIT-UH 300, W-VIZ, WIT-CONCRETE SCREW, WIT-PM 200, WIT-NORDIC, WIT-PE 500)

x 1 pcs

Cleaning brush with M6 WIT-RMB connecting thread

CLNBRSH-RMB28-MA-ST-(THR-M6)

Art.-no. 0903489628

For drill hole cleaning in concrete and masonry (WIT-VM 250, WIT-UH 300, W-VIZ, WIT-CONCRETE SCREW, WIT-PM 200, WIT-NORDIC, WIT-PE 500)

x 1 pcs

Pneumatic hose WIT-SDD

HOSE-PN-(WIT-SDD25-28)-ID13MM

Art.-no. 069990313

For borehole cleaning with compressed air. Incl. pre-assembled compressed air and threaded connection.

x 1 pcs

Mixer nozzle WIT-MX for Pure Epoxy WIT-PE 1000, Concrete Multi WIT-UH 300 and Pure Epoxy Basic WIT-PE 510 injection systems

MIXNOZ-(WIT-MX)

Art.-no. 0903488103

x 20 pcs

Machine chuck SDS-plus M8 SDS-plus M8 for REBAR cleaning brushes and WIT-RB cleaning brushes (Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

MAHOLD-F.CLNBRSH-WIT-PE500-PLUS

Art.-no. 0903489101

For REBAR cleaning brush and WIT-RB cleaning brush (concrete multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

Handle For cleaning brushes

HNDL-F.CLNBRSH-(T-HNDL)-M8

Art.-no. 0903489103

For borehole cleaning of injection and cartridge systems

x 1 pcs

Extension For cleaning brush with M8 connecting thread

EXT-F.CLNBRSH-THRM8-2X345MM

Art.-no. 0903489111

For WIT-RB cleaning brush (concrete Multi WIT-UH 300) and REBAR cleaning brush (WIT-PE 500, ALLROUNDER WIT-VM 250, REBAR)

x 1 pcs

Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB

CLNBRSH-(RB10)-MA-DRLHO10MM-ST-THRM8

Art.-no. 0903489510

For cleaning drill holes in concrete (Injection System Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB

CLNBRSH-(RB12)-MA-DRLHO12MM-ST-THRM8

Art.-no. 0903489512

For cleaning drill holes in concrete (Injection System Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB

CLNBRSH-(RB14)-MA-DRLHO14MM-ST-THRM8

Art.-no. 0903489514

For cleaning drill holes in concrete (Injection System Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB

CLNBRSH-(RB18)-MA-DRLHO18MM-ST-THRM8

Art.-no. 0903489518

For cleaning drill holes in concrete (Injection System Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB

CLNBRSH-(RB22)-MA-DRLHO22MM-ST-THRM8

Art.-no. 0903489522

For cleaning drill holes in concrete (Injection System Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB

CLNBRSH-(RB28)-MA-DRLHO28MM-ST-THRM8

Art.-no. 0903489528

For cleaning drill holes in concrete (Injection System Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB

CLNBRSH-(RB35)-MA-DRLHO35MM-ST-THRM8

Art.-no. 0903489535

For cleaning drill holes in concrete (Injection System Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000)

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additional accessory:

Product

Description

Quantity

Price
/PU

Mixer nozzle extension WIT-MV

EXT-(F.MIX-DWL)-PLA-10X200

Art.-no. 0903420004

Extension for the mixer nozzle