Welcome to Würth Finland For trade customers only
Cleaning solution For cleaning stainless steel with the WELNOX<SUP>®</SUP> ICSS 300-P cleaning device - CLN-WELD-(ICSS 300-P)-GREEN-100ML

Cleaning solution For cleaning stainless steel with the WELNOX® ICSS 300-P cleaning device

Cleaning solution
CLN-WELD-(ICSS 300-P)-GREEN-100ML

Art.-no. 0893984800
EAN 4046777299151
-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

For cleaning stainless steel with the WELNOX® ICSS 300-P cleaning device.
Product information

Würth Oy Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

 | 

 | 

Contents

100 ml

Weight of content

120 g

Min. flashing point

60 °C

Colour

Green

Smell/fragrance

Characteristic

Density

1.2 g/cm³

Chemical basis

Phosphoric acid

pH value

1

Suitable glove:
 
Product
Description
Vinyl chemical and moisture protective glove
Vinyl chemical and moisture protective glove
Description:
Permeation level: 6
Fully dipped protective glove with vinyl coating on cotton jersey lining
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Oy Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information
Show all product details