Cold-shrink tape
COLD SHRINKING TAPE 50MM 15M
Art.-no. 0985030185
EAN 6416127727098
Register and access more than 75 000 products
- The highly flexible and supple polyethylene film enables easy application without creases.
- Screw heads can be masked easily with the mechanically resilient and tear-resistant film.
- The odourless adhesive is free of solvents, chlorinated hydrocarbons and aromatic compounds, preventing unpleasant odours during application and subsequent system operation.
- The cold-shrink tape is UV-resistant when applied in a double layer, making it suitable for outdoor use.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For permanent airtight sealing of butt joints and sleeve joints of air ducts, folded spiral seam pipes and flexible pipes in pneumatic systems.
For powerful bonding between Aluflex and folded spiral-seam pipes without a screw connection.
Backing material thickness | 0.2 mm |
Width x length | 50 mm x 15 m |
Min. temperature resistance | -20 °C |
Max. temperature resistance | 60 °C |
Min. processing temperature | 5 °C |
Max. processing temperature | 60 °C |
Min. surface processing temperature | 5 °C |