Welcome to Würth Finland For trade customers only

Contact spray Oxidation solvent

Contact spray OL
CNTCTCLNR-OXYDATIONSOLVENT-200ML

Art.-no. 089360
EAN 4050641138873

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

Spray oxidation solvent
  • Cleans all types of contacts

  • Removes oxide and sulphide coatings, resin, oil and dirt

  • Eliminates "bangs" as well as impermissible high voltage resistances

  • Versatile range of applications – Does not attack most construction materials

  • Halogen-free
Notice

Oxidation solvent contact spray must be completely flashed off before the electrical system is restarted!

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

 | 

 | 

Contents

200 ml

Colour

Red

Smell/fragrance

Characteristic

Chemical basis

Mineral oil

Shelf life from production

24 Month

Silicone-free

No

Density

0.76 g/cm³

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information