Druckfix pneumatic application gun
Pneumatic application gun, Druckfix
CARTGUN-PN-DRUCKFIX-POUCH-600ML
MASTER
Register and access more than 75 000 products
Lightweight, compact and ergonomic design
Rotary pressure controller on handle for slow and fast extrusion
Additional fine regulation of the flow speed via trigger.
Optimal mobility
Damper on the quick-pull valve
Completely closed housing
Better protection of components e.g. the air supply pipe and easy cleaning.
The average consumption for pneumatic application guns is approx. 7.2 litres/minute. Caution: The maximum working pressure for applying sealants is 6 bar.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
1 Year Warranty
on issues of material and production
Datasheets(X)
Suitable for | 300/600 ml bag |
Flow capacity | 7.2 l/min |
Length | 445 mm |
Connection thread | 1/4 inch |
Weight of machine | 0.95 kg |
Max. operating pressure | 10 bar |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!