Finishing nailer for fastening into concrete
BRADDER SKS650-228C
Art.-no. 0703650228
EAN 4045759007654
Register and access more than 75 000 products
Fix to concrete or solid brick in no time. Select Ø 1.8 mm hardened steel nail by adding approx. 6–8 mm to the thickness of the material to be fixed. The nail penetrates normal strength concrete and holds firmly.
Skirting boards and door trims, auxiliary fittings for furniture, parquet spacers etc.
The nailer has a cushioned contact safety and a rubber-coated handle. Exhaust air direction control.
Use hose pressure from the compressor between 6–6.5 bar. Hold the nailer carefully perpendicular to the wall and keep the nailer firmly in place during nailing. Use two hands. Do not nail closer than 3–4 cm to the edge of the concrete to avoid chipping.
- Fast and effortless trim installation directly into concrete
- No drilling – no dust!
- Silent compared to drilled fastening
- Low-cost nails compared to hammer-in plugs
Datasheets(X)
Suitable for min./max. nail length | 19-50 mm |
Suitable for nail diameter | 1.8 mm |
Suitable for min./max. nail diameter | 1.8 - 1.8 mm |
Magazine capacity | 100 PCS |
Air consumption per impact | 1.4 l |
Weight of machine | 1.5 kg |
Min./max. operating pressure | 5-8 bar |
Length | 245 mm |
Width | 66 mm |
Height | 250 mm |
Min. hose inner diameter | 9 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!