Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 1

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 2

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 3

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 4

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 5

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 6

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 7

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 8

Fixanchor W-FAZ PRO/S - ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125 - 9

Fixanchor W-FAZ PRO/S

Name: Fixanchor W-FAZ PRO/S
Brand: Würth Oy
SKU: 5930212030

Fixanchor W-FAZ PRO steel zinc plated
ANC-(W-FAZ PRO/S)-(A2K)-0-50-M12X125

Art.-no. 5930212030

EAN 4062856404452

All versions

Similar products

Fixanchor W-FAZ PRO/S

Art.-no. 5930212030

Quantity

x 25 pcs

Show availability at another Würth Center

Exclusively for trade customers

Locate Würth Center
Login/Register
Call customer service: 010 308 6700

High-performance wedge anchor for high loads in cracked and uncracked concrete, zinc-plated steel

Highest load values at low spacing and edge distances

Extra-large effective anchorage depths maximise the already high load values per anchor

Quick installation with fewer reinforcement hits

Extra-small effective anchorage depths minimise the drilling and embedment time

Economical and flexible application

Freely selectable embedment depth allows optimum utilisation of the anchors depending on the embedment depth and application

Minimal edge distances and spacing

Allows for fixings close to edges, small anchor plates and installation in thin concrete parts

For earthquake-proof construction

High performance under seismic action, seismic performance categories C1 and C2

Proof of Performance

European Technical Assessment ETA-20/0229 for individual fixing point, option 1, cracked and uncracked concrete:

Static or quasi-static action (M8-M16)

Seismic action, performance category C1 and C2 (M8-M16)

Fire resistance R30, R60, R90, R120

Load-bearing behaviour and fire resistance (uniform temperature curve) - expert report no. GS 6.1/20-018-1:

Fire duration 180 minutes (M8-M16)

Swiss Federal Office for Civil Protection (Bundesamt für Bevölkerungsschutz, BABS) - Approval for shock testing BZS D 20-602

Use in Swiss civil protection buildings (M8-M16, from standard anchorage depth h_ef,std)

Application area

Fastening of railings

Cable trays

Metal substructures

Heavy steel structures

Post support bracket

Create the drill hole

European Technical Assessment ETA-20/0229 for individual fixing point, option 1, cracked and uncracked concrete:

Static or quasi-static action (M8-M16)

Seismic action, performance category C1 and C2 (M8-M16)

Fire resistance R30, R60, R90, R120

Load-bearing behaviour and fire resistance (uniform temperature curve) - expert report no. GS 6.1/20-018-1:

Fire duration 180 minutes (M8-M16)

Swiss Federal Office for Civil Protection (Bundesamt für Bevölkerungsschutz, BABS) - Approval for shock testing BZS D 20-602

Use in Swiss civil protection buildings (M8-M16, from standard anchorage depth h_ef,std)

Product information

Würth Oy Catalogue

Datasheets(X)

Certificates/ Documents / additional info

Application area

Individual fixing point or anchors in a redundant non-structural system with approval

In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete)

Suitable for pre-positioned installation, in-place installation and stand-off installation

Suitable for anchoring medium to heavy loads in concrete:

Installation of e.g. metal constructions, supports, steel supports, brackets, railings, cable conduits, pipe sections, wooden constructions, beams, joist brackets etc.

Fastenings subject to seismic activity in earthquake-prone areas

Fastenings subject to exposure to fire

The W-FAZ PRO/S, galvanized steel, may only be used in dry indoor conditions


Metric anchor diameter	M12
Anchor length (l)	125 mm
Min./max. height of the fixture (t fix)	0-50 mm
Attachment height standard (t fix,std)	30 mm
Min. effective anchoring depth (h ef, min)	50 mm
Max. effective anchoring depth (h ef, max)	100 mm
Effective anchoring depth Standard (h ef, std)	70 mm
Usable length (B)	100 mm
Attachment height variable (t fix ,var)	B - hef
Disc diameter x disc thickness	24 x 2.5 mm
Width across flats	19 mm
Nominal drill-bit diameter (d 0)	12 mm
Drill hole depth variable (h 0, var)	hef + 10
Min. drill hole depth (h 0, min)	60 mm
Max. drill hole depth (h 0, max)	110 mm
Drill hole depth Standard (h 0, std)	80 mm
Material	Steel
Surface	Zinc plated
Torque during anchoring (T inst)	60 Nm
Through-hole in the component to be connected (d f)	14 mm
Thread type x anchor diameter x thread length (L th)	M12 x 70
Bolt protrusion (C)	16 mm
Approval	ETA-20/0229
Seismology C1	Yes
Seismology C2	Yes

Anchor diameter		[mm]	M8			M10			M12			M16
Performance data¹⁾on an individual anchor without the influence of the edge distance
			in uncracked concrete
Admissible load when exposed to fire (R30, R60, R90, R120), see European Technical Assessment ETA-20/0229
Admissible load when exposed to fire (F180) according to the uniform temperature curve based on TR20, see expert report no. GS 6.1/20-018-1
			in cracked concrete
Admissible centric tension load in concrete C 20/25³⁾	N_adm	[kN]	5,0	6,7	6,7	6,1	11,4	11,2	8,5	14,3	14,1	12,6	23,8	18,8
Admissible shear load in concrete C 20/25³⁾	V_adm	[kN]	9,0			15,3			21,9			34,3
Admissible bending moment	M_adm	[Nm]	17,1			34,3			60,0			137,1
Variable effective anchorage depth	h_ef,var	[mm]	The effective anchorage depth can be set to anywhere between h_ef,min and h_ef,max. The Würth Technical Software can help you with the calculation.
			h_ef,min	h_ef,max	h_ef,std	h_ef,min	h_ef,max	h_ef,std	h_ef,min	h_ef,max	h_ef,std	h_ef,min	h_ef,max	h_ef,std
			35^₂₎	90	45	40	100	60	50	125	70	65	160	85
Admissible centric tension load in concrete C 20/25³⁾	N_adm	[kN]	3,5	4,5	4,5	4,3	7,1	7,1	6,1	10,5	10,0	9,0	14,3	13,4
Admissible shear load in concrete C 20/25³⁾	V_adm	[kN]	9,0	9,0	9,0	13,4	15,3	15,3	18,2	21,9	21,9	32,3	34,3	34,3
Admissible bending moment	M_adm	[Nm]	17,1			34,3			60,0			137,1
¹⁾ The partial safety factors of the resistances stipulated in the ETA and a partial safety factor of the action of γF = 1.4 have been taken into account. Please refer to the European Technical Assessment ETA-20/0229 for information on combining tensile and shear loads, variable effective anchorage depths influenced by edge distances and groups of anchors 2) ²⁾ Use is limited to the anchoring of statically indeterminate systems in dry indoor conditions ³⁾ The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths

Installation parameters¹⁾
Anchor diameter		[mm]	M8				M10
∅ of cutting edges	d_cut ≤	[mm]	8,45				10,45
Drill hole depth	h₀	[mm]	h_ef+8	43	98	53	h_ef+9	49	109	69
Through hole in the fixture	d_f ≤	[mm]	9				12
Width across flats	AF	[mm]	13				17
Torque while installing anchor	T_inst =	[Nm]	15				40
Height of the hexagon nut	t_nut	[mm]	6,5				8
Height x ∅ of washer	t_w x d_w	[mm]	1.5 x 16				2 x 20
Variable effective anchorage depths		h_ef	h_ef,var	h_ef,min	h_ef,max	h_ef,std	h_ef,var	h_ef,min	h_ef,max	h_ef,std
Variable effective anchorage depths		[mm]	h_ef	35	90	45	h_ef	40	100	60
Embedment depth	h_nom	[mm]	h_ef+8	43	98	53	h_ef+9	49	109	69
Minimum member thicknesses	h_min	[mm]	max (1.5·h_ef; 80)	80	135	80	max (1.5·h_ef; 80)	80	150	90
Minimum spacing	s_min	[mm]	35				40
Minimum edge distance	c_min	[mm]	40				45
Nominal drill ∅	d₀	[mm]	8				10
¹⁾ For groups of anchors and anchorage close to the edge, the combinations of the minimum values (member thickness, spacing and edge distances) and the associated loads must be determined in accordance with the calculation methods of European Technical Assessment (ETA-20/00229), depending on the effective anchorage depth.

Installation parameters¹⁾
Anchor diameter		[mm]	M12				M16
Nominal drill ∅	d₀	[mm]	12				16
∅ of cutting edges	d_cut ≤	[mm]	12,5				16,5
Drill hole depth	h₀	[mm]	h_ef+10	60	135	80	h_ef+14	79	174	99
Through hole in the fixture	d_f ≤	[mm]	14				18
Width across flats	AF	[mm]	19				24
Torque while installing anchor	T_inst =	[mm]	60				110
Height of the hexagon nut	t_nut	[mm]	10				13
Height x ∅ of washer	t_w x d_w	[mm]	2.5 x 24				3 x 30
Variable effective anchorage depths		h_ef	h_ef,var	h_ef,min	h_ef,max	h_ef,std	h_ef,var	h_ef,min	h_ef,max	h_ef,std
Variable effective anchorage depths		[mm]	h_ef	50	125	70	h_ef	65	160	85
Embedment depth	h_nom	[mm]	h_ef+10	60	135	80	h_ef+14	79	174	99
Minimum member thicknesses	h_min	[mm]	max (1.5·h_ef; 100)	100	187,5	105	max (1.5·h_ef; 120)	120	240	127,5
Minimum spacing	s_min	[mm]	50				65
Minimum edge distance	c_min	[mm]	55				65
¹⁾ For groups of anchors and anchorage close to the edge, the combinations of the minimum values (member thickness, spacing and edge distances) and the associated loads must be determined in accordance with the calculation methods of European Technical Assessment (ETA-20/00229), depending on the effective anchorage depth.

Additional accessory:

Product

Description

Quantity

Price
/PU

DRL-HAM-PLUS-Q-LV-D12,0-L210-WL160MM

ZEBRA

Art.-no. 0648051221

The perfect solution for reinforcements and hard materials, featuring a symmetrical, one-piece head with four cutting edges and a four-spiral Vario feed helix with core reinforcement

x 10 pcs

MECH-STGTL-(FIXANC-W-FAZ/W-FA)-(M8-M16)

Art.-no. 0904908016

For quick and convenient hammering in of Würth fixanchors W-FAZ PRO, W-FAZ (M8-M16) and W-FAZ using a hammer drill

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Fitting products for your order

Fixanchor W-FAZ PRO/S