Flux-cored welding wire Cor-A-Rosta 316L
MIG COR-A-ROSTA 316L 1,2X15KG
Art.-no. 0982930124
EAN 4053479981406
Register and access more than 75 000 products
High-quality Cor-A-Rosta 316L is a rutile flux-cored wire for MAG welding. Provides excellent performance in flat position welding of stainless and acid-resistant steels. The wire offers excellent feedability and produces an easy-to-use, bright weld surface. A stable arc and low spatter ensure efficient and clean welding. In addition, the slag is easy to remove, facilitating finishing and further processing.
- Gas-shielded stainless/acid-resistant flux-cored wire for flat position welding
- RST/HST for steels
- Excellent wire feed properties and easy-to-use bright weld appearance
- Stable arc
- Minimal splashes
- Good slag removal
AWS A5.22 E 316LT0-1/-4
EN ISO 17633-A 19 12 3 L R C/M3
Power type/Shielding gas
DC+
Ar+ (>5–25%) CO2 (EN 439: M21)
100% CO2 (EN 439: C1)
Flow: 15 - 25 L/min
AWS A5.22 E 316LT0-1/-4
EN ISO 17633-A 19 12 3 L R C/M3
Datasheets(X)
Wire diameter (Ø) | 1.2 mm |
Weight | 15 kg |
Min. longitudinal elongation | 25 % |
Min. tensile strength | 485 N/mm² |
Product weight (per item) | 15 kg |
Shielding gas | Argon/CO2 |
| Mechanical properties, typical, clean welding material | Welded Required AWS | EN 17633-A | Typical values M21/C1 |
| Yield strength N/mm² | not required | min 320 | 440 |
| Tensile strength N/mm² | min 485 | min 510 | 580 |
| Elongation % | min 30 | min 25 | 38 |
| Impact strength ISO-V(J) +20°C | 70 | ||
| -110°C | 40 |
Approvals | |
| LR | TÜV |
| + | + |
Chemical analysis | ||||||
| C | Mn | Si | Cr | Ni | Mo | FN |
| 0,03 | 1,3 | 0,5 | 19 | 12 | 2,7 | 8 |