Foam gun
Foam gun
FMGUN-2,1LTR-1/4IN
Register and access more than 75 000 products
Uniform foam structure
- Economical
- Effective use of cleaners with long-lasting results and slow-running foam
- Areas to which foam has already been applied are easy to identify
User-friendly
Easy to mount on existing high-pressure cleaners or steam jets using adapters
All parts that come into contact with cleaner are made from stainless steel or plastic
- Corrosion-resistant
- Foam gun is easy to clean
Ideal dispensing of cleaner using the set screw
Rinse the foam gun with water after use.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For foaming cleaning agents when cleaning bodywork, chassis, attachments, tarpaulins, workshops, service rooms and stalls
Use the appropriate adapter to connect the foam gun to the gun handle on the high-pressure device, and fill the tank with cleaner.
Type description | Foam cleaner |
Included in delivery | Container, adapter 1/4" on union nut for Kärcher high-pressure devices M22, 1/4" on M22 reducing nipple |
Min. operating pressure | 150 bar |
Max. operating pressure | 200 bar |
Coverage distance | 3 m |
Connection thread | 1/4 inch |
Bin capacity | 2.1 l |
Max. water temperature | 80 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!