Gas operated anchor nailer KMR AN34/60
High-performance fuel unit KMR AN34/60
NL-PINDRIV-ANC-(KMR AN34/60)-GAS-L425
Register and access more than 75 000 products
- Magazine angle 34°
- Plastic bound Würth nail anchors 4.0 x 40 to 60 mm
- Adjustable impact depth
- Easy, quick and safe to use
KMR anchor nailer is used to nail 1.5 to 4 mm thick construction brackets into wood.
Nailer uses a standard gas cartridge, 40 g, and a battery. Single charge lasts
approximately 8,000 triggers and the gas cartridge lasts approximately 1,200 triggers.
The nailer is delivered in a spacious plastic case. Delivery includes 2 batteries, charging equipment, user and service instructions.
Always hold the nailer firmly with both hands. Make sure that the nailer is perpendicular to the nailing plate. When nailing at an angle, the nailer may be guided past the hole and thus create a hazardous situation.
Datasheets(X)
Select the appropriate Würth 34° anchor nail for the construction bracket you are installing and slide the nail comb in to the magazine
from the end of the magazine. Pull the nail guide over the nail comb. Ready the gas cartridge for use, open the nailer
gas cartridge cover, install the cartridge and close the cover. Then insert the charged battery. The nailer is
ready to use.
Aim the safety catch of the nail into the hole of the bracket, activate the nailer by pushing and press the trigger.
The nail is guided into the hole and it fixes the bracket into its mounting surface. The nailer is immediately ready for the next nailing operation.
Remove the battery from the nailer after use. Always keep the nailer and accessories in the case. The best by date of the gas cartridge
is printed on the cartridge.
null | null |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!