Welcome to Würth Finland For trade customers only

Gypsum plasterboard anchor W-GS type K with reinforced centring point

Gypsum plasterboard anchor W-GS
DWL-(W-GS/K)-PLA-14,5X33

Art.-no. 09032511
EAN 4053479244495

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

For cost-effective and fast installation in gypsum plasterboard, without the need for pre-drilling or an additional setting tool, with hexagon drive
  • High-quality plastic

  • Attachment via mechanical interlock

  • Rapid installation, no setting tool or pre-drilling required, with cordless screwdriver and suitable bit for the relevant screw

  • The drive allows the anchor to be inserted using a PZ, AW or TX bit, as the hexagon head transfers the load

  • The twist lock is triggered by screwing in a screw. When the screw is unscrewed, the plasterboard plug does not turn in the reverse direction, but remains in the base material

  • Minimal space required behind panel (only 15 mm)

  • The component can be attached with wood screws or chipboard screws

  • The plasterboard plug and the screw can be inserted with the same bit

  • The lathe centre enables easy positioning and drilling into the panel

  • For installation, we recommend the ASSY®-D screw
Notice
  • To attach the component, use the ASSY®-D ∅4.5 mm- plug screw or a wood/particle board screw without drill bit tip, counter thread or ring thread

  • Use in damp areas in combination with a stainless steel screw

  • Type K made from fibreglass-reinforced plastic is suitable for standard gypsum panels
Application area

Coat rails

Press anchor tips into attachment surface

Screw in anchor until flush

Mount component

Product information

Datasheets(X)

Certificates/ Documents / additional info

 | 

 | 

Application area
  • For attaching light items to plasterboard, ideal in combination with the ASSY®-D 4.5 mm-diameter screw

  • Can be used with every 1/4 inch drive bit

Type description

W-GS/K

Anchor length (l) (l)

33 mm

Material

Plastic

Required particle-board screw diameter

4.5 - 5 mm

Hole diameter in component (d Bau)

6.5 mm

Minimum component thickness (d)

9.5 mm

Max. attachment height (d a) - condition (da)

Dependent on screw length

Min. temperature resistance

-40 °C

Max. temperature resistance

80 °C

Edge clearance (a r)

50 mm

Centre-to-centre distance (a)

100 mm

Performance data
Anchor diameter [mm] Type K
Recommended tensile load Gypsum plasterboard d ≥ = 12.5 mm Frec.[kN] 0,1
Gypsum plasterboard d ≥ = 25 mm 0,1
Gypsum fibreboard -
Recommended transverse load Gypsum plasterboard d ≥ = 12.5 mm Frec.[kN] 0,12
Gypsum plasterboard d ≥ = 25 mm 0,12
Gypsum fibreboard -

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information