Hand-held circular saw HKS 65-E POWER
Hand-held circular saw HKS 65-E POWER
CRCLSAW-EL-HKS 65-E POWER
Art.-no. 57066000
EAN 4053479289588
Register and access more than 75 000 products
Ergonomic design
- Low weight for perfect handling
- Base plate from die-cast aluminium
Rapid progress with work
With constant electronics, the speed remains constant, even under loads.
Adjustable speed
Speed preselection for matching to each operation.
Protection of the user and the motor
Soft start
Extraction device
Almost no sawdust in the working area if used in conjunction with a Würth industrial vacuum cleaner.
3 Years Warranty on manufacturing and material defects
Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Datasheets(X)
Nominal voltage | 230 V/AC |
Min./max. frequency | 50 / 60 Hz |
Protection class | Protection class II/protective insulation |
Power input | 1800 W |
Min./max. idle speed | 2300-5000 rpm |
Min./max. rotation speed at nominal load | 1400-4000 rpm |
Suitable for bore diameter | 30 mm |
Max. saw-blade diameter | 190 mm |
Min./max. mitre angle | 0-45 Degree |
Max. cutting depth at 90 degrees | 65 mm |
Max. cutting depth at 45 degrees | 48 mm |
Base plate length x base plate width | 327 x 203 mm |
Weight of machine | 5.2 kg |
Cable length | 4 m |
OFFSET SCREWDRIVER 1907950006
SP-BAND
SP-ANGLE
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units