Welcome to Würth Finland For trade customers only

Headlight refurbishment set

Headlight detailing set 2-stage Sysko
HDLGHTDTL-SYSKO-25PCS

Art.-no. 5964089316
EAN 4052713967350
-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

Professional 2-stage system for refurbishment of heavily weathered vehicle headlights

Stone chips, UV rays and other mechanical influences cause the surfaces of polycarbonate lenses to become cloudy or leave behind scratches and marks over the years.



  • Regenerates almost all vehicle headlights

  • Gives them new luminosity

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Certificates/ Documents / additional info

 | 

 | 

Application area

Professional 2-stage system for refurbishment of heavily weathered vehicle headlights

including:
5 x

DSPAP-USEIT-P-CAR-P240-D75MM

ZEBRA
Description: The perforated sanding disc for filler and filler compounds, HS top-coat paints and water-based paints, as well as plastics and composite fibre materials (e.g. GFRP).
Quantity: 5 x
5 x

DSPAP-USEIT-P-CAR-P320-D75MM

ZEBRA
Description: The perforated sanding disc for filler and filler compounds, HS top-coat paints and water-based paints, as well as plastics and composite fibre materials (e.g. GFRP).
Quantity: 5 x
5 x

DSPAP-USEIT-P-CAR-P400-D75MM

ZEBRA
Description: The perforated sanding disc for filler and filler compounds, HS top-coat paints and water-based paints, as well as plastics and composite fibre materials (e.g. GFRP).
Quantity: 5 x
3 x

POLPAD-ORANGE-SOFT-D90X25MM

Description: Polishing pads in different abrasive grades
Quantity: 3 x
2 x

POLHOOD-LMBWOL-WHITE-D80MM

Description: For professional polishing work on heavily stressed and weathered paint surfaces.
Quantity: 2 x
1 x

SPRTPLT-POLPAD-HOKLP-M14-D80MM

Description: For fastening polishing pads, lambskins etc. with hook and loop mounting
Quantity: 1 x
1 x

FM-(F.POLDISC-05860180)-SFT

Description: Special foam as soft layer between pad and support plate
Quantity: 1 x
1 x

HOLD-CLNBRSH-MANDREL-6MM-M14

Description: With M14 mounting thread and 6mm shaft
Quantity: 1 x
1 x

SNDBLOCK-HND-SOFT-D73MM

Description: Sanding block made of soft yellow foam dia. 73 mm hook-and-loop mounting.
Quantity: 1 x
1 x

ADHDISC-HOKLP-M6-WO.HO-D75

Description: Special support plate with M6 receptacle for use with compressed air polishers and grinding machines.
Quantity: 1 x
2 x

DSPAP-USEIT-SG3-500-D75MM

ZEBRA
Description: The finishing disc for finishing and polish sanding.
Quantity: 2 x
3 x

DSPAP-USEIT-SG2-1000-D75MM

ZEBRA
Description: The finishing disc for finishing and polish sanding.
Quantity: 3 x
3 x

DSPAP-USEIT-SG2-2000-D75MM

ZEBRA
Description: The finishing disc for finishing and polish sanding.
Quantity: 3 x
3 x

DSPAP-USEIT-SG2-4000-D75MM

ZEBRA
Description: The finishing disc for finishing and polish sanding.
Quantity: 3 x
1 x

NPL-PN-S2000-ET-R1/4IN

Description: With male thread
Quantity: 1 x
1 x

RANORBSNDR-PN-MINI-DME75

MASTER
Description: Powerful, small compressed air random orbital sander for minor sanding tasks and headlight repairs
Quantity: 1 x
1 x

POL-POLYCARBONAT-P80-250G

Description: For replenishing assortment for headlight refurbishment
Quantity: 1 x
1 x

POL-POLYCARBONAT-P90-250G

Description: For treating heavily weathered vehicle headlights
Quantity: 1 x
1 x

MICROCLTH-(DUO)-BLUE-40X40CM

Description: One side for cleaning and one side for polishing
Quantity: 1 x
1 x

CRPTPE-PREC-38MMX50M

Description: Special paper tape for the highest requirements during masking work in the painting, automotive and metal sectors
Quantity: 1 x
1 x

CLRLACSPR-2K-RAPID-CLEARCOAT-250ML

Description: For permanent sealing of touched-up surfaces and newly painted small parts
Quantity: 1 x
1 x

ADHPROMOR-PC-(PC-PRIMER)-250ML

Description: Colourless 1C primer for repairing damage to diffusers in vehicle headlights.
Quantity: 1 x
1 x

SYSCASE-8.4.3

SYSTEMKOFFER
Description: Ideal for flexible storage of small parts, machines and tools used with consumables
Quantity: 1 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information