Hot air gun Express 4600
Gas soldering pistol 4600 Express
SLDRGUN-GAS-4600
Register and access more than 75 000 products
- Adjustable gas supply
- Using overhead
- Up to 2 hours working time with one cartridge
- Temperature up to 900°C on the workpiece surface
- Unrestricted working without power cable with minimal weight (approx. 570 g with cartridge)
Due to the large number of applications, we do not assume any liability for a specific application result.
Preliminary tests are recommended in areas that are not visible.
- Never touch the front nozzle during use or even shortly after use. Wait for the housing to cool.
- Do not cool the device with water after use. Instead, let it cool by itself.
- Please only use the recommended cartridges 444 or 445.
- Please do not store the device in environments whose temperature is above 40°C/104°F.
- Keep the device away from the eyes.
- Keep the device out of reach of children.
Caution: The flame is not visible in bright light or in daylight (risk of burns)
Included in scope of delivery:
- 1 x flat push-on nozzle
- 1 x nozzle with deflector
Datasheets(X)
- For use without mains power
- For heating heat-shrink tubing, shaped plastic materials
- Soldering, for example copper piping
- Drying
- Removing paints and varnishes
- Thawing iced-up locks and piping, as well as loosening adhesive and seized screws and nuts
When replacing the cartridge, make sure that the gas supply is completely closed before removing the gas tank. Fully unscrew the gas tank in the vertical position, only tighten by hand when screwing in.
After an hour of continuous operation, allow for a 15-minute period of cooling.
After each use: Let the appliance cool down fully and unscrew the gas tank completely.
Power rating | 520 W |
SPRECART-EXPRESS 4600-110ML
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!