Hot water washer hose 2SC
Steel wire braid hose for hot water 2SC
BRAIDHOSE-ST-2PLY-2SC-1/4IN
Art.-no.
5973202204
EAN 4061975281593
-
Show availability at another Würth Center
In order to check the stock in a Würth Oy branch, please log in.
If you have any questions, please call our service hotline at 010 308 6700.
Do you want to register as an Online Shop user?
Please go to the eShop registration page.
Exclusively for trade customers
Register and access more than 75 000 products
Pressure hose for pressure washers and hot water washers
Hydraulic hose for use in hot water washers
This hose is used in high-pressure washer systems, which require high durability
Well suited for use as a pressure hose in laundrettes
The blue colour indicates that the hose has a higher temperature resistance.
Interior:
- in addition to water, the synthetic rubber is suited for hydraulic oil, mineral oil and vegetable oil
Reinforcement:
- two high-quality tensile strength steel braidings
Exterior:
- synthetic rubber resistant to oil, weather and wear
NoticeIf the hose and the hose clamps used in the hose assembly are from a different manufacturer,
the provided compression measures are only indicative and must be checked with a gauge.
the provided compression measures are only indicative and must be checked with a gauge.
Product information
Datasheets(X)
Application area
Operating temperature: -10 °C to +155 °C (peak)
Safety factor 4
Internal diameter in inches | 1/4 in |
Outer diameter | 13.4 mm |
Operating pressure | 400 bar |
Bending radius | 75 mm |
Burst pressure | 1600 bar |
Internal diameter | 6.4 mm |
Min./max. temperature resistance | -10 to 135 °C |