Impact drill SB 13-XE
Impact drill SB 13-XE
IMPDRL-EL-(SB13-XE)-CASE
SB13-XE
Art.-no. 07023222
EAN 4056807121031
Register and access more than 75 000 products
Stops the tool spinning in the drill chuck
Single-sleeve quick-action drill chuck with clamping force lock and tungsten carbide jaws
Faulty cables replaced or longer leads attached in seconds
Special connection system
High reliability and optimum power transmission
Solid metal planetary gears
Accidental changeover impossible
2-speed switch with lock on the outside of the housing
Clockwise/anti-clockwise rotation changeover switch on the top of the housing
Service cover for simple carbon brush replacement
Replacement carbon brushes are also found in the handle
Safe hold, even at high torques
Rugged additional handle with depth stop
Clamping neck conforms to Euro standard
3 Years Warranty on manufacturing and material defects
Excluded are damages caused by improper use, overloading or failure to observe the operating instructions.
Datasheets(X)
Nominal voltage | 230 V/AC |
Min./max. frequency | 50 / 60 Hz |
Protection class | Protection class II/protective insulation |
Power input | 750 W |
Power output | 375 W |
Idle speed 1st/2nd gear min./max. | 0-1200 / 0-3400 rpm |
Impact rate | 31500 rpm |
Max. drilling diameter in steel | 13 mm |
Drill chuck holder | 1/2 inch x 20 UNF |
Min./max. drill chuck span width | 1-13 mm |
Length x height | 335 x 207 mm |
Weight of machine | 2.2 kg |
Cable length | 4 m |
Included in delivery | With accessories in system case 8.4.2 |
AUXILIARY HANDLE
CASEINRT-(BM13/SB13)-SYS-8.4.2
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!