Log joint pair
Slide bracket, RS1, timber joints
HIRSIKE PAIR
-
Show availability at another Würth Center
In order to check the stock in a Würth Oy branch, please log in.
If you have any questions, please call our service hotline at 010 308 6700.
Do you want to register as an Online Shop user?
Please go to the eShop registration page.
Exclusively for trade customers
Register and access more than 75 000 products
A log joint pair is used to attach wood structures that require room for movement,
such as attaching roof trusses in log houses.
Attached on both sides.
such as attaching roof trusses in log houses.
Attached on both sides.
Steel quality: S250GD, in accordance with EN 10346:2009.
Surface coating: Z275
The log joint pairs are made of hot-dip galvanised steel plate; 20 µm average hot-dip zinc coating.
Can be used in climate stress category C1.
Fittings used:
Nailing plate screws, anchor nails
Dimensions:
Bracket: 89x70x40x2
Nailing plate: 230 x 40 x 2
Product information
Datasheets(X)
Material | Steel sheet, 1.0226 |
Surface | Hot dip galvanized |