Lubricating grease Stabutherm
LUBRICANT STABUTHERM GH 461 400G
Register and access more than 75 000 products
Stabutherm GH 461 is an advanced combination of mineral oil and polyurea, capable of withstanding high temperatures. This grease is an excellent choice for lubricating rolling bearings in tools, machines and equipment. Good pumpability also in centralized lubrication systems, where NLGI 1 polyurea-based grease is recommended. NSF H2 food-grade approval.
For applications with particularly high demands on lubricants due to operating temperature and water-induced corrosion.
- High maximum operating temperature; in loss lubrication max. 200°C (short-term 250°C)
- Smooth pumping in all standard central lubrication systems
- Temperature resistance (continuous): -20°C to 180°C
- Excellent protection against wear
- Good anti-corrosion properties
- Good resistance against corrosive agents
- NLGI 1
- Polyurea thickener
- NSF approved
Datasheets(X)
Can be used in foundries and rolling mills, and it is particularly suited for high-temperature lubrication points that are centrally fed, for example in
- continuous foundries’ rolls (sheet bars and billets)
- continuous furnaces’ conveyor rolls
- annealing furnaces, drying ovens
- foundry crane sleeve bearings
- board machine hot rolling mills
- glass and ceramics industry machines
- bulk cargo equipment gates
- cooling beds, conveyor systems
- rotating drying ovens
Chemical basis | Mineral oil |
Oil basis | Mineral oil |
Colour | Beige |
Density | 0.9 g/cm³ |
Smell/fragrance | Characteristic |
Min. temperature conditions | -20 °C |
Max. temperature resistance | 180 °C |
Min. temperature resistance | -20 °C |
Max. temperature conditions | 180 °C |
Max. short-term temperature resistance | 180 °C |
Kinematic oil basis viscosity | 490 mm²/s |
NLGI grade | 1 |
Resistance against | Corrosion, Water |
Contents | 400 ml |
Weight of content | 400 g |
Shelf life from production | 36 Month |