Welcome to Würth Finland For trade customers only

Lubricating grease WGF 130

Lubricating grease WGF 130
GRSE-ROLLBEAR-HIGHPERFORMANCE-WGF130-1KG

Art.-no. 0893530
EAN 4050641135193

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

High-performance lubricating grease
  • Lithium-soap grease with molybdenum sulphide (MoS2)

  • Forms a solid lubricating film on the running surfaces under load from the grease itself

  • Significantly improves run-in conditions

  • Ensures additional emergency running lubrication

  • Reduces friction and thus prevents excessive wear

  • Extends lubricating period

  • Protects against corrosion

  • Resistant to water

  • Temperature resistant from -30°C to +130°C, briefly up to +150°C

  • Colour: Black

  • Consistency as per NLGI: 2

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

 | 

 | 

Application area

High-performance grease for lubricating roller and slide bearings of all kinds.

Instructions

Clean and degrease the lubricating points. Then apply the grease to the desired layer thickness.

Chemical basis

Lithium 12 hydroxystearate

Oil basis

Mineral oil

Colour

Black

Density

1 g/cm³

Smell/fragrance

Oil

Min. dripping point

180 °C

Min. temperature conditions

-30 °C

Max. temperature resistance

130 °C

Min. temperature resistance

-30 °C

Max. temperature conditions

150 °C

Max. short-term temperature resistance

150 °C

Kinematic oil basis viscosity

280 cSt

Behaviour in the presence of water

1-90

Conditions for behaviour in the presence of water

in accordance with DIN 51807-1

NLGI grade

2

Worked penetration

265 to 295 x 0.1 mm

Worked penetration conditions

in accordance with DIN ISO 2137

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

Resistance against

Water

Contents

1 l

Weight of content

1000 g

Shelf life from production

36 Month

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information