Welcome to Würth Finland For trade customers only

Multi Plus maintenance oil

Maintenance oil Multi Plus
MAINTOIL-(MULTI PLUS)-400ML

Art.-no. 0893056
EAN 4045989955886

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

High-performance multi-purpose spray for universal use
  • Universal, high-performance synthetic multi-function spray with excellent lubricating properties thanks to the addition of boron nitride

  • Excellent penetrating capability and water displacement also for use as rust remover, contact spray and long-term corrosion protection.

  • The boron nitride allows a wide temperature range and long-lasting lubricating effect. If the oil lubrication breaks off at higher temperatures (above 180°C), the boron nitride takes over the lubrication up to 1000°C (dry lubrication).

  • Free of microplastics

  • Free from silicone, resin, acid and n-hexane
Notice

Physiologically safe lubricant; ideally suited for the food processing industry. NSF H1-registered.


If used in areas in which food is processed or stored, only the minimum quantity technically required may be used. If the product is to be used as an anti-corrosive film, it must be completely removed before the device in question is used again.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

 | 

 | 

Application area

Universal synthetic, physiologically safe high-performance multifunctional spray.

Instructions

Shake the can well before use, then spray parts and allow product to take effect briefly.

Contents

400 ml

Chemical basis

Synthetic oil with a multifunction additive combination

Colour

Colourless

Min./max. temperature conditions

-50 to 210 °C

Shelf life from production

24 Month

Min. temperature conditions

-50 °C

Max. temperature conditions

210 °C

Min. flashing point

61 °C

Silicone-free

Yes

Acid-free

Yes

Resin-free

Yes

AOX-free

Yes

Resistance against

Water
Salt water
Acid
Lye

White oil-free/mineral oil-free

Yes

VOC concentration (CH)

53.89 %

Kinematic oil basis viscosity

32 mm²/s

Material compatibility

Steel
Non-ferrous heavy metals
Stainless steel
Epoxy glass fabric
EPDM
FKM
PE
PP
Vinyl
PTFE
PL
PA

Conditions for viscosity of oil basis

at 40°C

Weight of content

332 g

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information