Welcome to Würth Finland For trade customers only

Multiclean cleaning liquid

Multiclean cleaning fluid
ASMBYCLNR-(MULTICLEAN)-H1-400ML

Art.-no. 08901096
EAN 4045989955978

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

For cleaning and temporary lubrication in physiologically and ecologically sensitive areas. NSF-certified.

Can be used in areas in which food is processed or stored, NSF H1 and K1


The product may come into contact with foodstuffs for technical reasons



Good cleaning and degreasing performance


Removes oils, encrusted resin and silicone residues



Good material compatibility



Acetone-free



AOX and silicone-free

Notice

If used in areas in which food is processed or stored, only the minimum quantity technically required may be used.


NSF = internationally recognised organisation for the supervision and registration of products used in the food industry


VbF = Ordinance on Combustible Liquids (no longer valid as of 01.01.2004) has been replaced by the BetrSichV [Operational Safety Ordinance] (valid as of 03.10.2002)

NSF H1 and K1 registered (no.: 135926), meets the requirements of USDA 1998 H1

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

 | 

 | 

Application area

For residue-free cleaning and degreasing during assembly and maintenance work on machinery, assemblies and tools in critical areas of the food, pharmaceutical and printing industries as well as for applications in which the use of easily and highly inflammable cleaners is not desired.

Instructions

Spray from a distance of approx. 20 cm onto the parts to be cleaned, and allow to dry.

Contents

400 ml

Smell/fragrance

Characteristic

Colour

Colourless

Chemical basis

Aliphatic hydrocarbon

Density/conditions

0.78 g/cm³ / Active substance, 20°C

Min. flashing point

40 °C

Acetone-free

Yes

Silicone-free

Yes

AOX-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information