Welcome to Würth Finland For trade customers only

Paint spray gun polyester filler gun AP P For highly viscous materials for filling

Paint spray gun AP P for polyester filler
PNTSPRGUN-POLYESTERFILLER-(AP-P)

Art.-no. 089170010
EAN 4011231826259
-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

  • Gun for polyester spray filler

  • Integrated material quantity control, stepless round/wide jet control

  • Low air consumption at low spray pressure

  • Self-adjusting air and material seal

  • Special jet for reducing covering and sanding work

  • Input pressure: 2.0–3.0 bar

  • Air required: 200 l/min

  • Spraying distance: 18 - 23 cm

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Datasheets(X)

Certificates/ Documents / additional info

 | 

 | 

Application area

For low-mist processing of high-viscosity thick film fillers, such as polyester fillers, 2C thick film fillers, synthetic resin fillers or spray fillers.

Contents

600 ml

Product weight (per item)

733 g

Included in delivery

Paint gun complete with 600 ml plastic cup, connecting nipple, tool set and 2.5 mm nozzle

Colour

Grey

Material

Plastic / metal

Min. operating pressure

2 bar

Max. operating pressure

3 bar

Operating pressure

2.5 bar

Air consumption

200 l/min

Min. spraying distance

18 cm

Max. spraying distance

23 cm

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information