For detailed information, other images and documents, please select individual articles from the following table.
Register and access more than 75 000 products
Variants
Register and access more than 75 000 products
Call customer service: 010 308 6700
Prices for customers after login
This single-row angular contact ball bearing is a self-retaining bearing that can be loaded radially and axially in one direction.
The counter-alignment needed by the bearing is typically implemented using a second, mirrored angular contact ball bearing.
Bearings that are installed side by side in an X or O pattern must be the fitted (UA) type.
- BD:contact angle 30° for series 32 and 33
- B or BB:contact angle 25° for series 32 and 33
- B:contact angle 40° for series 72 and 73
- JP:steel plate holder
- MP:solid brass holder
- M:solid brass holder for rolling elements, guiding
- MA:brass holder, outer ring guidance
- TVP:solid window holder, glass fibre reinforced polyamide
- TVH:solid window holder, glass fibre reinforced polyamide
- UA:universal pair adapter, the bearing pair has a minimal axial clearance in O and X position
- UO:universal pair adapter, the bearing pair has no clearance in O and X position
- UL:Universal pair adapter, low pre-tension on the bearing pair in O and X position
- 2RSR:abrasive rubber seal on both sides of the bearing
- 2Z:non-abrasive sheet metal protection plate on both sides bearing
- C3: larger than normal bearing clearance, the rolling element has a little more space between the bearing rings
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!