Roller nailer 0° TJEP ZE-65 Excellent Pneumatic coil nailer 0° for roller nails tied with plastic tape 32-65mm
Pneumatic coil nailer TJEP ZE-65 Excellent
NLR-PN-COIL-(TJEP-ZE65-EXCELLENT)
Register and access more than 75 000 products
A versatile and top-quality nailer for demanding work
- Nailer is especially designed for wooden external claddings or for nailing work of similar wood board products
- A wide range of nails as needed; clear, zinc plated, hot-dip galvanized and stainless
- Recommended operating pressure 6.5-7.5bar
- The nailer has a depth adjustment function and the user can select either single actuation or a contact actuation
- Padded safety catch and correct adjustments ensure the best end result
The nailer is delivered in a plastic carrying case, which contains the user manual, the necessary hex keys, protective glasses and a bottle of lubricating oil.
Datasheets(X)
- Ensure sufficient air output of the compressor. A nailing rate of 1/s needs a net output of at least 100l/min from the compressor.
- When lubricating the nailer, use the supplied lubricating oil or a lubricant suitable for compressed air devices.
- The need to lubricate the nailer varies depending on the conditions.
- A nailer in daily use should be lubricated with a few drops of oil dispensed from the compressed air connector to the nailer, about once a week.
Suitable for min./max. nail length | 32-65 mm |
Suitable for min./max. nail diameter | 2.1 - 3.0 mm |
Magazine capacity | 325 PCS |
Air consumption per impact | 1.4 l |
Weight of machine | 2.13 kg |
Min./max. operating pressure | 5-8.3 bar |
Length | 293 mm |
Width | 151 mm |
Height | 333 mm |
Min. hose inner diameter | 8 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!