SPEED cutting disc for aluminium and non-ferrous metals
CUTDISC-SP-YELL-ALU-SR-TH1,9-BR22,2-D230
-
Show availability at another Würth Center
In order to check the stock in a Würth Oy branch, please log in.
If you have any questions, please call our service hotline at 010 308 6700.
Do you want to register as an Online Shop user?
Please go to the eShop registration page.
Exclusively for trade customers
Register and access more than 75 000 products
Our cutting disc with a long service life and maximum cutting performance
- Faster and more effective due to very short cutting times
- Very thin for precise and almost burr-free cuts
- The very thin design also ensures very clean and cool cutting surfaces
- High protection against breakage
- The low effort required ensures comfortable working and is gentle on the user and the power tool
- ZEBRA quality for particularly high demands
Notice
- Store in a dry place, at 20 °C room temperature
- Always wear appropriate protective clothing while working
- Always use an appropriate protective cover when performing cutting work
- Only use undamaged discs
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure
- Always clamp cutting discs (straight design) with the metal ring towards the power tool
- For further information, please refer to the package insert
Complies with the most demanding safety requirements of European Standard EN 12413 and the OSA (the Organization for the Safety of Abrasives)
Product information
Datasheets(X)
Application area
- Suitable for aluminium, aluminium alloys and other non-ferrous metals such as copper, brass, bronze etc.
- Particularly effective at cutting thin-walled pipes and profiles (e.g. window profiles), thin metal sheets, roof coverings, roof gutters etc.
Versatility (points system) | 1 of 4 points |
Service life (points system) | 3 of 4 points |
Cutting ability (point system) | 4 of 4 points |
Handling/user-friendliness (point system) | 3 of 4 points |
Cut quality (point system) | 3 of 4 points |
Diameter x thickness | 230 x 1.9 mm |
Bore hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 6600 rpm |
Material to be processed | Non-ferrous metal |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!