Welcome to Würth Finland For trade customers only

Satin-finish wheel brush for wood crimped, with hole

Stranded wire brush
BRSH-STRAWRE-SATNFINR-(MS)-100X70X19MM

Art.-no. 067297770
EAN 4011231554176
-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

Due to the special wire arrangement, the brush is particularly suitable for heavy brushing work and can be used for aggressive brushing. Ideal for sanding, polishing, smoothing, matting and structuring.
  • Excellent for surface structuring work on large-scale workpieces

  • Increased brushing effect

  • Additional holding of the wires through the stranded construction

  • For use on angle grinders
Notice
  • Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.

  • Can be used on all standard brush sanders.

  • Always wear safety goggles and safety gloves when working with machine brushes!
Product information

Datasheets(X)

Certificates/ Documents / additional info

 | 

 | 

Application area
  • Deburring and removal of rust and dirt

  • Brushing out the soft annual rings in coniferous wood

  • Roughing of the surface of hardwoods

Diameter x width x drill hole (DxBxA)

100 x 70 x 19 mm

Material of wire

Steel

Surface of the wire

Brass plated

Design

Corrugated

Wire diameter

0.25 mm

Aggressiveness

Hard

Suitable for satin finisher (point system)

4 of 4 points

Max. rotation speed

8000 rpm

EN standard

1083-2

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information