Screw anchor Dome TX30 ZN WIP W-BS Compact
Concrete screw W-BS Compact WIP
CONCSC-(W-BS/COMPACT)-TX30-6X28-5PCS
Register and access more than 75 000 products
Quick and easy mounting
Can be mounted by hand
Push-through installation
Quick, cost-effective installation
- We recommend installing the W-BS Compact manually using a screwdriver.
- If you are using a cordless screwdriver, we recommend performing five preliminary tests to ensure the correct cordless screwdriver setting and to prevent overtightening of the W-BS Compact. We recommend that you start the cordless screwdriver at the lowest torque setting and increase as necessary.
- Do not use a tangential impact drill driver for installation.
- ETA-15/0091 serial fastenings to non-load-bearing concrete structures
- Fire classification: R30, R60, R90, R120; Technical Report TR020
Datasheets(X)
For multiple attachment in non-load-bearing structures in accordance with European Technical Approvals
- E.g.: assembly rails, nonius hangers, etc.
- In cracked and non-cracked concrete ≥ C20/25
W-BS Compact (zinc-plated steel) can only be used indoors in dry conditions
Anchor size | 6 mm |
Thread diameter | 77 mm |
Anchor length (l) | 28 mm |
Head type | Pan head |
Max. attachment height (t fix) | 1 mm |
Internal drive | TX30 |
Nominal drill-bit diameter (d 0) | 6.0 mm |
Drill hole depth (h 1) | 28 mm |
Surface | Zinc plated |
Material | Steel |
Minimum component thickness (h min) | 80 mm |
Effective anchoring depth (h ef) | 25 mm |
Through-hole in the component to be connected (d f) | 8.0 mm |
Drill cutting diameter (d cut) | 6.4 mm |