Screw-type hose connector, for pin plugs Straight air trunking
Central lubric. hose connection, straight, push in
CENTLUB-HOSE-STUD-SR-BLCK-6MM
Art.-no.
5973101921
EAN 4061975711151
-
Show availability at another Würth Center
In order to check the stock in a Würth Oy branch, please log in.
If you have any questions, please call our service hotline at 010 308 6700.
Do you want to register as an Online Shop user?
Please go to the eShop registration page.
Exclusively for trade customers
Register and access more than 75 000 products
For central lubrication and individual lubrication applications. Very easy installation.
The pipe part of the connector is grooved. Compatible with central lubrication pin plugs.
- Compatible with pin plugs used by Lincoln lubrication systems
The hose spindle contains a plug.
- When tightening the connector, the plug is pressed against the inner edge of the hose
- Only part of the plug is pushed inside the hose, not the whole spindle
The connector is only compatible with the specific sleeve.
- The spindle thread is only compatible with certain sleeves
Sturdy and secure connection with hand tools.
- Assembly and repair possible under field conditions
Product information
Datasheets(X)
Instructions
First, attach the sleeve to the hose. Then, attach the connector to the sleeve-hose combination.
Finally, tighten with a wrench.
Nominal diameter | 6 mm |
Length | 52.5 mm |
Min./max. inner diameter | 3.9-4.1 mm |
Min./max. external diameter | 8.5-8.75 mm |
Width across flats | 10 mm |
Length 2 | 21.5 mm |