Welcome to Würth Finland For trade customers only

Sealing compound Modelling clay

Sealing compound
BDYWRKSEAL-ACRYLIC-310ML

Art.-no. 0890100027
EAN 4045989331918

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

Soft, permanently plastic sealing compound in original state

Can be moulded by hand


Can be pushed into the joint to be sealed etc.



Good adhesion



Does not shrink



Resistant to water

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

 | 

 | 

Application area

For minor repairs and/or for working in hard-to-reach places (e.g. sealing cable apertures and wire apertures).

Instructions

The base material must be clean, dry and free of grease. For more information, please refer to the technical data sheet.

null

null

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information