Series 4000 plug-in nipple with comfort connection for PU pneumatic hoses
NPL-PN-S4000-SL-PU-11X16MM
-
Show availability at another Würth Center
In order to check the stock in a Würth Oy branch, please log in.
If you have any questions, please call our service hotline at 010 308 6700.
Do you want to register as an Online Shop user?
Please go to the eShop registration page.
Exclusively for trade customers
Register and access more than 75 000 products
Up to 3,900 l/min flow rate at 16 bar operating pressure to maximise the performance of your compressed air consumers
- Hardened steel nipples ensure maximum load capacity and a long service life
- Airtight connections reduce energy consumption and boost efficiency
- Exposed surfaces are either chrome plated, nickel plated or zinc plated and offer high corrosion resistance and reliable protection under demanding conditions
- Series 4000 fittings comply with Euro standard 10.4 and are compatible with other pneumatic fittings
Instructions
Unscrew locking sleeve and push over the hose.
Then slide hose up over grommet as far as possible while twisting back and forth slightly.
Then screw on the locking bush as far as possible.
Product information
Datasheets(X)
Material | Steel |
Suitable for hose internal diameter | 11 mm |
Suitable for hose external diameter | 16 mm |
Length (L) | 54 mm |
Surface | Zinc plated |
Width across flats (SW) | 24 mm |
Max. pressure | 16 bar |
Flow capacity | 3900 l/min |