Shank coil nails 16°, ringed shank Conical coil
RDMGNL-16DGR-CONI-(SHNK-RG)-(HDG)-2,1X38
-
Show availability at another Würth Center
In order to check the stock in a Würth Oy branch, please log in.
If you have any questions, please call our service hotline at 010 308 6700.
Do you want to register as an Online Shop user?
Please go to the eShop registration page.
Exclusively for trade customers
Register and access more than 75 000 products
Hot-dip galvanised coil nail is the right choice for outdoor use when large volumes are required. A coil of up to 300 nails lasts long and enables uninterrupted work.
Hot-dip galvanised conical coil nails can be used in nailers designed for conical (dome-shaped) coil nails.
Most commonly, coil nails are used for fastening exterior cladding, soffits, window reveals or similar applications.
Würth 16° coil nails are compatible with all nailers using corresponding nails. When using a coil nailer, it is recommended to use a compressor with high air output, as a dense nailing rate can easily consume over 200 l/min of air.
- Coil nail - uninterrupted working
- Very small, round head leaves a very clean finish
- 2.1 mm nail is ideal for finishing exterior cladding
- Window reveals, corner boards, eaves etc.
Product information
Datasheets(X)
Nominal diameter (d1) | 2.1 mm |
Length (l1) | 38 mm |
Material | Steel |
Surface | Hot dip galvanized |
Number per pallet | 179200 PCS |
RoHS-compliant | Yes |