Steel sprayer
Compressed air sprayer
SPRR-CA-STEEL-24LTR
Register and access more than 75 000 products
- The internal plastic coating insulates the tank from chemicals, prevents oxidation and the formation of rust
- The tank is made of steel, painted, certified and tested up to a working pressure of 8 bar
- Independent functioning after reaching pressure, thus allowing working without a tube for compressed air
- Equipped with safety valve calibrated to 8 bar
- Fine mist sprayer: allows uniform coverage on surfaces, as the spray particles are very small (see photograph)
- Rotating connection that prevents twisting of the tube
- Provided in cardboard box, includes wand and gun for spraying
The spraying devices have been designed and manufactured to disperse water, neutral detergent solutions (pH=7) and non-aggressive and/or non-corrosive liquids
Always check the biodegradability and aggressiveness of the products used
The device must not be used with flammable liquids (alcohol, solvents, petrol etc.), oxidising agents (oxygen) or flammable gases
The device must not be used to clean animals, electric engines or hot surfaces
The safety devices and components that are firmly screwed to the assembly (funnel, safety valve, pressure regulator and all devices firmly attached to the funnel) must not be removed or maintained
Datasheets(X)
Width | 290 mm |
Height | 770 mm |
Depth | 320 mm |
Volumetric capacity | 24 l |
Connection thread | R 1/4 inch |
Operating pressure | 8 bar |
Material of tank | Steel |
Surface of the tank | Lacquered |
Product weight (per item) | 11000 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!