Welcome to Würth Finland For trade customers only

Tapping and chipping hammer BMH 40-BL

Hammer drill/chipping hammer BMH 40-BL
HAMDRLCHPNGHAM-EL-(BMH40-BL)
MASTER

Art.-no. 07025541
EAN 4056807897868

-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

Brushless hammer drill and chipping hammer with SDS-max drive arbour, die-cast aluminium housing and anti-vibration mechanism for comfortable working at maximum performance

Maintenance-free and durable


Brushless motor



Suitable for tough construction site conditions


Robust die-cast aluminium housing



Ideal when working in softer materials


Control electronics with infinite speed and stroke rate control



Consistent speeds under load


Constant electronics with infinite speed and stroke rate control



Safe working


Safety slip clutch mechanically decouples the drive if the drill jams



Effortless work


12-way chisel adjustment allows adjustment to different working angles during chiselling work

Product information

Datasheets(X)

Certificates/ Documents / additional info

 | 

 | 

Nominal voltage

230 V/AC

Frequency

50 Hz

Protection class

Protection class II/protective insulation

Power input

1150 W

Power output

650 W

Min./max. idle speed

250-500 rpm

Min./max. impact rate

1430-2850 rpm

Tool holding device

Suitable for SDS-max

Impact energy

8.7 J

Min./max. drilling diameter in concrete

12-40 mm

Min./max. recommended drilling range for optimum performance (in concrete)

25-35 mm

Max. drilling diameter of breakthrough drill in concrete

65 mm

Max. drilling capacity (volume) in concrete per minute

1 cm³

Max. chiselling power in concrete

200 kg/h

Max. drilling diameter of hollow drill bit in masonry

105 mm

Weight of machine

7.5 kg

Cable length

3.8 m

including:
1 x

MAINTSPR-CONCENTRATE-100ML

Description: For lubricating hinges, tool mounts and machine mounts
Quantity: 1 x
1 x

CASE-EMPTY-(BMH40-BL)

Quantity: 1 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information