Welcome to Würth Finland For trade customers only

Universal fluxing agent no. 50 FM for brazing metal

Universal fluxing agent no. 50 FM f. brazing metal
BRAZFLX-NO50FM-UNI-100G

Art.-no. 0987550
EAN 4053479357232
-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

Flux paste in accordance with DIN EN 1045, type FH10
  • Flux for brazing copper, brass and red bronze gunmetal

  • DIN 29454

  • White paste
Notice

The residues of the fluxing agent are corrosive and must therefore be removed.

This product is subject to the provisions of the German Chemicals Prohibition Ordinance. Detailed information on the hazards arising from this product, the precautionary steps to be taken during proper use, dealing with spillages or other exposure and ensuring correct disposal can be found in the safety data sheet.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents / additional info

 | 

 | 

Application area

Fluxing agent for hard soldering of copper, brass and gunmetal alloys except for light metals with an operating temperature range from 500°C to 800°C

Instructions

Mix paste well before using. Apply fluxing agent to the cleaned work piece by brushing or immersion. Flux agent should also be applied to the area around the soldering point.

Weight of content

100 g

Colour

White

Smell/fragrance

Odourless

Chemical basis

Potassium tetrafluoroborate

DIN

29454

Shelf life from production

24 Month

pH value

11

Density

1.35 g/cm³

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information