Wiggle wire
Wiggle wire
WGLWRE-DRSW
Art.-no.
0691500147
EAN 4024835928977
-
Show availability at another Würth Center
In order to check the stock in a Würth Oy branch, please log in.
If you have any questions, please call our service hotline at 010 308 6700.
Do you want to register as an Online Shop user?
Please go to the eShop registration page.
Exclusively for trade customers
Register and access more than 75 000 products
For welding onto steel bodywork for 3x claws and Bi-Puller
Wiggle wire enables you to pull at multiple pulling points simultaneously
Typical peak stresses do not occur which prevents sheet metal from tearing and bumps from forming.
Notice
Total length 360 mm x 50 pcs. = 18 m. Wire thickness: 2 mm
Product information
Datasheets(X)
Instructions
Bend the wiggle wire slightly beforehand so that only a single curve comes into contact with the sheet metal during welding. It is advisable to weld every curve. Always weld towards the transformer earth, not the other way around.
 | |
Length | 360 mm |
Wire diameter | 2 mm |
Product weight (per item) | 12.700 g |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!