Welcome to Würth Finland For trade customers only

Würth FP backfill material

High-temperature wool, high density
BCKFLSEAL-MINFBR-25X48X600MM-15PCS

Art.-no. 0893301020
EAN 4046777650167
-

Show availability at another Würth Center
Exclusively for trade customers

Register and access more than 75 000 products

A high density alkaline earth silicate wool (AES) for fire protection sealing of linear joints as well as wall and floor service penetrations.

A high density backing material for fire protection joints and penetration sealing.



Available in different sizes, depending on the requirements.



Fire protection joints:


  • Apply a properly dimensioned backing material in the correct joint depth to prevent 3-sided adhesion.


Fire protection sealing of service penetrations:


  • Use correct backing material in the sealing according to the relevant installation instructions of the fire protection products.
Notice

The fire rated properties of the joints depend heavily on the joint geometry (one-/double-sided, joint width/depth). See separate data sheets or approvals of the corresponding fire protection products.

Product information

Datasheets(X)

Certificates/ Documents / additional info

 | 

 | 

Instructions

Read the safety data sheet before use. If backing material is required for the penetration or joint sealing of approved fire protection products, install it firmly into the required depth.

Material

Mineral fibre

Min. melting temperature

1100 °C

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents / additional info

 | 

 | 

Technical information