For detailed information, other images and documents, please select individual articles from the following table.
Plain bearing TB-092-F
Flanged bronze plain bearings with lubrication holes are well suited for slow movements, high loads, and require continuous lubrication.
Register and access more than 75 000 products
Variants
Register and access more than 75 000 products
Call customer service: 010 308 6700
Prices for customers after login
Flanged wrapped bronze bearing made of tin bronze alloy. The bearings have lubrication holes in the sliding surface. These holes enable a lubrication film that works from the very first movement.
This cold-rolled bronze alloy has excellent properties in applications with high loads and relatively slow movements. This bearing material performs very well in dirty conditions. Additional lubrication is always required.
Speed/load:
- Static 280 N/mm²
- 0.01 m/s 100–140 N/mm²
- 2.0 m/s 40–50 N/mm²
Friction:
- 0.06–0.25 μ depending on lubrication
Material hardness:
- ~150 HB
Tolerance:
- A bearing installed in an H7 housing bore achieves a final tolerance of H9
- Recommended shaft tolerance e7/f7
Lubrication:
- Additional lubrication is required and must be supplied via a grease groove in the shaft or housing
- All standard lubricants can be used
Recommended are greases with additives such as molybdenum disulfide or graphite
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!