Välkommen till Würth Finland Endast för näringsidkare

HSS/HSCo end mill

De populäraste produkterna i HSS/HSCo end mill kategori
Shaft cutter HSCo8 long DIN 844L type N Z4-6
Shaft cutter HSCo8 long DIN 844L type N Z4-6

Wide range of applications for low-strength materials, though also difficult-to-machine materials.

1 variant

Visa varianter
End mill HSCo8 short DIN 844K type NR TiAlN
End mill HSCo8 short DIN 844K type NR TiAlN

Recommended for cutting high-strength, hard-to-machine materials up to 1,300 N/mm² and for titanium and titanium alloys.

1 variant

Visa varianter
End mill HSCo8 DIN 844K Z3-6 2xD type N TiAlN
End mill HSCo8 DIN 844K Z3-6 2xD type N TiAlN

Wide range of applications for low-strength materials, yet also difficult-to-machine materials including of high strength, e.g. constructions steels through to tool steels. Also suitable, however, for non-ferrous metals, cobalt and nickel alloys, titanium and titanium alloys.

1 variant

Visa varianter
Keyway cutter HSCo8, short, NF, cut 4 TiAIN
Keyway cutter HSCo8, short, NF, cut 4 TiAIN

1 variant

Visa varianter
Shaft cutter HSCo8 shortly DIN 844K type N Z3-6
Shaft cutter HSCo8 shortly DIN 844K type N Z3-6

Wide range of applications for low-strength materials, yet also difficult-to-machine materials including of high strength, e.g. constructions steels through to tool steels. Also suitable, however, for non-ferrous metals, cobalt and nickel alloys, titanium and titanium alloys.

1 variant

Visa varianter
End mill HSCo8 short DIN 844K W Z3 TiAlN
End mill HSCo8 short DIN 844K W Z3 TiAlN

1 variant

Visa varianter