Thread-cutting tool set HSS 67-pieces Sysko
Thread-cutting tool set HSS 67-pieces Sysko
SYSTEMKOFFER
Varunr.
5964065267
EAN-nummer 4062856244430
-
Visa tillgänglighet i annat Würth Center
Om du vill kontrollera lagersaldot på en Würth Oy-filial loggar du in med dina inloggningsuppgifter .
Om du har några frågor ringer du vår kundtjänst på 010 308 6700.
Vill du registrera dig för att handla i onlinebutiken?
Gå till registreringssidan för eShop.
Exklusivt för handeln
Registrera dig och få tillgång till fler än 75 000 produkter
The complete assortment for producing M3-M20 standard metric ISO threads in steel up to 850 N/mm² strength and in cast iron.
Antal delar i sortiment/set | 67 Stck(pcs) |
Material | HSS |
Thread-cutting tool set HSS 67-pieces Sysko ingår:
1
x
Beskrivning:
1 x 5,5 mm; Klinglängd: 25 mm
Short, brushed chrome-plated shank and 2-component handle
Mängd:
1
x
1
x
Beskrivning:
2,5 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
3,3 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
4,2 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
5,0 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
6,8 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
8,5 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
10,2 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
12,0 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
14,0 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
15,5 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Beskrivning:
17,5 mm
Precision steel drill bit for general, broad applications in steel up to 1,000 N/mm² and in cast iron.
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M10
Beskrivning:
M10 x 1,5
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M12
Beskrivning:
M12 x 1,75
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M14
Beskrivning:
M14 x 2,0
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M16
Beskrivning:
M16 x 2,0
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M18
Beskrivning:
M18 x 2,5
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M20
Beskrivning:
M20 x 2,5
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
GÄNGTAPP HSS FÖRTAPP M 3
Beskrivning:
M3 x 0,5
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
GÄNGTAPP HSS FÖRTAPP M 4
Beskrivning:
M4 x 0,7
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M5
Beskrivning:
M5 x 0,8
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M6
Beskrivning:
M6 x 1,0
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 taper
HANDGÄNGTAPP HSS FÖRTAPP M8
Beskrivning:
M8 x 1,25
With trim cut form A for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M10
Beskrivning:
M10 x 1,5
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M12
Beskrivning:
M12 x 1,75
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M14
Beskrivning:
M14 x 2,0
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M16
Beskrivning:
M16 x 2,0
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
GÄNGTAPP HSS MELLANTAPP M18
Beskrivning:
M18 x 2,5
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
GÄNGTAPP HSS MELLANTAPP M20
Beskrivning:
M20 x 2,5
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M3
Beskrivning:
M3 x 0,5
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M4
Beskrivning:
M4 x 0,7
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M5
Beskrivning:
M5 x 0,8
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 intermediate
HNDTAP-INTMED-DIN352-HSS-M6
Beskrivning:
M6 x 1,0
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Beskrivning:
M8 x 1,25
With trim cut form D for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Beskrivning:
M10 x 1,5
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M12
Beskrivning:
M12 x 1,75
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M14
Beskrivning:
M14 x 2
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M16
Beskrivning:
M16 x 2
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
GÄNGTAPP HSS GRADTAPP M18
Beskrivning:
M18 x 2,5
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
GÄNGTAPP HSS GRADTAPP M20
Beskrivning:
M20 x 2,5
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M3
Beskrivning:
M3 x 0,5
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M4
Beskrivning:
M4 x 0,7
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M5
Beskrivning:
M5 x 0,8
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M6
Beskrivning:
M6 x 1
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Hand screw tap HSS DIN 352 plug
HNDTAP-PLG-DIN352-HSS-M8
Beskrivning:
M8 x 1,25
With trim cut form C for producing metric ISO standard threads by hand in accordance with DIN13 in through holes and blind holes in the steel, non-ferrous metals and cast iron material groups up to a strength of 800 N/mm²
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M10
Beskrivning:
M10 x 1,5
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M12
Beskrivning:
M12 x 1,75
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M14
Beskrivning:
M14 x 2,0
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M16
Beskrivning:
M16 x 2,0
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M18
Beskrivning:
M18 x 2,5
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M20
Beskrivning:
M20 x 2,5
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M3
Beskrivning:
M3 x 0,5
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M4
Beskrivning:
M4 x 0,7
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M5
Beskrivning:
M5 x 0,8
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M6
Beskrivning:
M6 x 1,0
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Threaded die DIN 13-1
GÄNGSNITT HSS M8
Beskrivning:
M8 x 1,25
Round die in accordance with DIN EN 22568 in closed, pre-slotted design (shape B) for the production of standard metric ISO threads according to DIN 13 in steel up to 850 N/mm² strength and in cast iron.
Mängd:
1
x
1
x
Tool holder with ratchet, short model
T-HANDTAG TILL GÄNGTAPP M 3-10
Beskrivning:
Skruvtapp M3 - M8, kvadratisk fattning 2,4 - 5,5 mm
Mängd:
1
x
1
x
Tool holder with ratchet, short model
T-HANDTAG TILL GÄNGTAPP M 5-12
Beskrivning:
Skruvtapp M5 - M12, kvadratisk fattning 4,5 - 8 mm
Mängd:
1
x
1
x
System insert foam 8.4.1
SYSINRT-FOAM-(F.5964065200)
SYSTEMKOFFER
Beskrivning:
For safely storing work tools and products for material processing and machines. Can be used in combination with other system partitions.
Mängd:
1
x
1
x
System insert foam 8.4.2
SYSINRT-FOAM-(F.5964065201)
SYSTEMKOFFER
Beskrivning:
For safely storing work tools and products for material processing and machines. Can be used in combination with other system partitions.
Mängd:
1
x
1
x
Beskrivning:
Ideal for flexible storage of small parts, machines and tools used with consumables
Mängd:
1
x
1
x
Tap wrench DIN 1814 Performance, adjustable
TAPWRNCH-DIN1814-PERFORMANCE-SZ1-(M1-10)
ZEBRA
Beskrivning:
Lämplig för min./max. kvadratisk hylsstorlek: 2-6,3 mm
Performance tap wrench for mounting tools with square shank according to DIN 10 with redesigned reinforced body as well as knurled handles for very high loads.
Mängd:
1
x
1
x
Tap wrench DIN 1814 Performance, adjustable
TAPWRNCH-DIN1814-PERFORMANCE-SZ2-(M4-12)
ZEBRA
Beskrivning:
Lämplig för min./max. kvadratisk hylsstorlek: 3-9 mm
Performance tap wrench for mounting tools with square shank according to DIN 10 with redesigned reinforced body as well as knurled handles for very high loads.
Mängd:
1
x
1
x
Tap wrench DIN 1814 Performance, adjustable
TAPWRNCH-DIN1814-PERFORMANCE-SZ3-(M5-20)
ZEBRA
Beskrivning:
Lämplig för min./max. kvadratisk hylsstorlek: 4,9-12 mm
Performance tap wrench for mounting tools with square shank according to DIN 10 with redesigned reinforced body as well as knurled handles for very high loads.
Mängd:
1
x
1
x
Die holder EN 22568 Performance
HOLD-THRDIE-EN22568-PERFORMANCE-20X5
ZEBRA
Beskrivning:
Innerdiameter x höjd: 20 x 5 mm
Performance thread-cutting die holder made from die-cast zinc for mounting round thread-cutting dies in accordance with DIN EN 22568, DIN EN 24231 and factory standard with newly designed, reinforced body, as well as black coated handles made of steel for very high loads.
Mängd:
1
x
1
x
Die holder EN 22568 Performance
HOLD-THRDIE-EN22568-PERFORMANCE-20X7
ZEBRA
Beskrivning:
Innerdiameter x höjd: 20 x 7 mm
Performance thread-cutting die holder made from die-cast zinc for mounting round thread-cutting dies in accordance with DIN EN 22568, DIN EN 24231 and factory standard with newly designed, reinforced body, as well as black coated handles made of steel for very high loads.
Mängd:
1
x
1
x
Die holder EN 22568 Performance
HOLD-THRDIE-EN22568-PERFORMANCE-25X9
ZEBRA
Beskrivning:
Innerdiameter x höjd: 25 x 9 mm
Performance thread-cutting die holder made from die-cast zinc for mounting round thread-cutting dies in accordance with DIN EN 22568, DIN EN 24231 and factory standard with newly designed, reinforced body, as well as black coated handles made of steel for very high loads.
Mängd:
1
x
1
x
Die holder EN 22568 Performance
HOLD-THRDIE-EN22568-PERFORMANCE-30X11
ZEBRA
Beskrivning:
Innerdiameter x höjd: 30 x 11 mm
Performance thread-cutting die holder made from die-cast zinc for mounting round thread-cutting dies in accordance with DIN EN 22568, DIN EN 24231 and factory standard with newly designed, reinforced body, as well as black coated handles made of steel for very high loads.
Mängd:
1
x
1
x
Die holder EN 22568 Performance
HOLD-THRDIE-EN22568-PERFORMANCE-38X14
ZEBRA
Beskrivning:
Innerdiameter x höjd: 38 x 14 mm
Performance thread-cutting die holder made from die-cast zinc for mounting round thread-cutting dies in accordance with DIN EN 22568, DIN EN 24231 and factory standard with newly designed, reinforced body, as well as black coated handles made of steel for very high loads.
Mängd:
1
x
1
x
Die holder EN 22568 Performance
HOLD-THRDIE-EN22568-PERFORMANCE-45X18
ZEBRA
Beskrivning:
Innerdiameter x höjd: 45 x 18 mm
Performance thread-cutting die holder made from die-cast zinc for mounting round thread-cutting dies in accordance with DIN EN 22568, DIN EN 24231 and factory standard with newly designed, reinforced body, as well as black coated handles made of steel for very high loads.
Mängd:
1
x
Förpackningsenheten anger antal varor, som finns i en förpackning. I katalogdelen kan man välja mellan olika förpackningsenheter, när en valmeny blir synlig. Vid direkt varunummerinmatning i varukorgen eller vid registrering med Easy-/VarioScan känner man inte förpackningsenheten, lämna fältet tomt. I detta fall meddelas en förpackningsenhet automatiskt.
Würth Oy-varunr. är sammanställda på följande sätt:VVVVAAABBB, 4 siffror som förnummer (Observera att första siffran är för närvarande alltid en 0, AAA=3 siffror, första siffran är för närvarande alltid en 0, AAA=3 siffror för storleksdel 1, BBB=3 siffror för storleksdel 2, exempel på varuuppbyggnad: exempel 1: skruv i dimension 4x10 mm: VVVVAAABBB 0574 10 (2 mellanslag mellan 4 och 10), exempel 2: skruv i dimension 10x20 mm: VVVAAABBB 005710 20 (1 mellanslag mellan 10 och 20), exempel 3: underläggsbricka med invändig diameter på 6mm, VVVVAAABBB 04076.
Pris på förpackningspaket (VE): det framförda priset motsvarar alltid den visade förpackningen, vid VE på 250, priset är för 250 stycken, vid VE på 300, priset är för 300 stycken. Pris med prisnyckelframställning (PSL). Priset gäller alltid för en mängd som regleras genom prisnyckel pris för 1 styck, pris för 100 stycken, pris för 1000 stycken.
Antalet visar antalet enheter i beställningen eller leveransen och enheten för varje artikel.
Till skillnad från säljförpackningar och yttre förpackningar visas kasseringskostnaderna för kemikaliebaserade produkter separat. Fördelningen av de enskilda kostnaderna hittar du i relevant produktinformation och även i varukorgen, samt i våra försäljningsvillkor.